Give Your Old Floor A Whole New Look With Acid Washing

By: Gen Wright Click author's name for more of his/her articles

Are you tired of your old flooring? Has it become old and grayed and doesn't look anywhere nearly as good as it used to? Usually, it is very hard to get a great looking floor with minimal work. It can be a lot of work to get back that new looking flooring without using some of the great products that are available today. The secret to a great looking flooring with minimal effort is acid washing.

For those who don't know what acid washing is, it might sound like an extreme thing to do. Acid is a bad thing right? Acid is actually the exact thing that you need to get that flooring looking worth a million bucks again. What acid washing actually does is that burns off a thin, imperceptible layer of concrete and hence exposes a brand new layer underneath. By doing this, you can get a great looking flooring in no time at all. And since the acid does all the work for you, you do not need to do much. But do make sure that you know exactly how to go about using an acid wash.

First of all, you need to ensure that you have protective clothing and facemask to protect you from the acid itself and the fumes that it will cause when in use. Be careful to protect your skin completely so that you are not accidentally splashed when you are working with acid. Next, you need to get an estimate of how much acid wash you will need take care of the entire surface area that you have. You can consult some of the great online guides for this. They will tell you exactly what you need in your specific situation.

Next you need soda ash to neutralize the acid after use. The usual measurement is one pound of soda ash per gallon of acid wash used. So it is better that you buy the soda ash after you buy the acid wash for your needs. Usually though, you can just buy them together, the online stores are very helpful in this regard and they can tell you exactly the amount you will need for the job. So now that you are all set, you might need to alert your civic authority like the municipality that you will be releasing potentially harmful waste water in to the drainage. If they have regulations regarding this, make sure you follow it and keep yourself out of trouble's reach.

To begin, dilute the acid as per requirement and start applying it on the floor. Make sure that you do not let the wash stand for longer than the stipulated time or else you will end with corrosion marks and furrows all over the place. The Acid will eat in to the surface. You can simply hose it all down when it is done. Make sure to neutralize the run off water with soda ash before draining it out of your home.

Article Source: ABC Article Directory

About The Author: Buy high quality Concrete Stain and wood stain.