Home | Home | Home Improvement | Interior Design

Installing Skirting Boards – Making the Work Easier

By: Luke Wildman Click author's name for more of his/her articles

Skirting boards are created to cover the gap in between the bottom of the walls and that of your flooring. Its purpose is to protect the wall's bottom area from any type of damage. This purpose will only be achieved once you have installed the skirting boards properly. You do not have to be a professional to do bulk of the job although some specialised skills may be required in the process.
Skirting boards are known by other names. You may call it baseboards, mop boards or floor mouldings. Whichever way you want to term it, the boards will definitely provide better security to your room's foundation. You need it to actually protect the entire abode from any harm. Now, take a peek at the easiest ways to install mop boards.
How to install skirting boards
There are basically five easy steps to install baseboards. In order for you to master the installation of these essential boards, get some help from keywords. These are techniques you will utilise in the process. Learn about these five concepts below:
1. Measure. Measuring the perimeter of the room is essential to know how many metres of skirting boards you will need in the entire project. Use this as your guide in buying excess boards in order to give room for wastage or wrong cuts on the board.
2. Install. With the right measurement, you are now ready to install the boards. Make sure that you provide extra portions before laying the skirt boards on the floor. Mitre each corner at around 45 degrees. In this regard it is always important to do some testing and fitting before placing the boards permanently on the surface.
3. Nail. There are two ways by which you may nail the skirting boards to the wall studs. First, simply use an air nailer. Second, you may use hammers and finished nails in the process. When you decide to utilise the last method, make sure that you use nail sets. This is important to get rid of marks from the hammer whilst nailing the skirt boards.
4. Trim. Again, you need to mitre the four corners of the board at 45 degrees. This is for you to attain the fit you want for the project. Trim the edges and corners until such time you get the perfect fit for your skirting boards.
5. Caulk. This is a process that will help conceal the imperfections. Caulking is essential to seal the gaps between the skirting boards and that of your walls. Make sure that you paint the boards with the same colour as that of your walls to make the project look more perfect.
Just simply remember these five easy steps in installing skirting boards. This will make your task easier. Trying to do the project on your own will allow you to save on installation cost. Remember that learning all these tips will work much for your favour. Never hesitate to ask help with the installation of your skirting boards if you think you cannot do the task though. There are a lot of professionals out there willing to give you a hand on this type of project.

Article Source: ABC Article Directory

About The Author: If you need more help in installing skirting boards, simply get help from www.skirtingboardsdirect.com